[b]* je vends ça
- CARTE MERE
1°/ QDI platinum 2D
Chipset Intel 845 (DDR) Chipset
North Bridge: 845 (DDR)
South Bridge: Intel 82801BA (ICH2)
Slots 1AGP 6PCI 1CNR
CPU Support Socket 478 processors
Intel Pentium 4 processors(Willamette) at 1.6/1.7/1.8/1.9/2.0GHz
Intel Pentium 4 processors(Northwood) 1.6A/1.8A/2.0A/2.2/2.4/2.5/2.6 GHz
Intel Celeron processors at 1.6/1.7/1.8/1.9
System Memory T wo 184 Pin DDR DIMM Socket Support 266/200 MHz DDR
Support up to 2GB DDR
PC 2100/1600 compliant
Bus Speed 400MHz FSB
BIOS 2 Mbit firmware Hub
Licensed advanced Award (phoenix) BIOS
Support Plug and Play
Support ACPI and OS directed power management
Storage system Two PCI Master IDE ports support up to 4 IDE devices
Support ATA 33/66/100
One Floppy port support up to two 3.5’ or 5.25’ floppy drives
(360K/720K/1.2M/1.44M/2.88M)
Support LS-120 floppy disk drive and ZIP drive
I/O Feature 2 high speed Serial Ports (16550 Fast UART Compatible)
1 Enhanced Parallel Port support EPP/ECP/SPP
4 USB support USB1.1(2 USB on back panel, 2 USB on front header with optional cable)
1 PS/2 keyboard port
1 PS/2 mouse port
1 Speaker 1 Line in 1 Mic(Optional)
1 Game port(Optional)
IrDA port support up to 115.2Kb/s transfer rate
All I/O ports can be enabled/disabled by BIOS setup
AGP 4X Slot Provides AGP 4X interface
Support AGP 2.0
Transfer rate up to 1GB/sec
Advanced Feature PCI 2.2 Specification compliant
Support OS soft-off
Wakeup on LAN
Wake up on Modem
Power-on by keyboard password
Trend ChipAway Virus on Guard
5 LEDs to indicate CPU/chipset, Memory, PCI peripherals, clockgen and graphics card status.
Power management Support ACPI(Advance configration and power interface) and ODPM(OS Directed Power Management)
CPU temperature, System temperature, CPU fan speed,
Chassis fan speed, 8 System Voltages
Power Management
ACPI v1.0 and APM Compliant
Support S0(full-on),S1(power on suspend),S3(suspend to RAM),S5(soft-off) ACPI power status
LAN On board 82562ET chipset(optional)
Board Size ATX: 305 x 224mm
La partie son est HS mais je fourni une carte son avec.
Je met aussi 1 carte réseau 10/100 PCI
la carte est nue sans autre accessoire ni manuel. CD de pilotes. il n’y a que le i/o shield à l’arrière + CD de pilotes
l’ensemble 25 fdpi
La CM QDI + Le CPU Intel P4 1.7 Ghz +son ventirad + Carte son + Carte réseau + Carte graphique Radeon 9600 Pro = 50 fdpi
2°/ ASUS P4v-533mx avec sa plaque i/o : 25 fdpi
- CPU
-
P4 1.7 Ghz Costa rica S478 + ventirad d’origine 15 fdpi
-
Sempron XP 2400 + socket 462 + ventirad origine 20 fdpi
-
P4 2.4 ghz S478 + ventirad d’origine 20 fdpi
- MEMOIRE
-
2 x 512 Mo DDR2 So-Dimm SAMSUNG PC3200 15 fdpi
- LECTEURS DIVERS
rien
- ECRANS
1°/ CRT : PEACOK 17" TOP 17 10 FDPO
2°/ CRT : 2 x NEC VR17 10 FDPO
3°/ CRT : NEC MULTISYNC FE700 10 FDPO
- CARTE GRAPHIQUE
-
1 ATI Radeon 9600 Pro 128 Mo DDR AGP 8x : 15 fdpi
-
1 Gforce MX440Se AGP 2x 64 Mo 10 fdpi
- 1 Hercules Prophet 9800 Pro 128 Mo AGP 8x boîte 25 fdpi vendu sur 2xmoinscher.com- RESEAU
rien
- LOT DIVERS
rien
Je précise que tout ce matériel est aussi en vente sur les sites hardware.fr et 2 X moins cher.com
- J’ACHETE
- 1 support mural Panasonic TY-WK42PV3W pour un écran plasma
- 2 écrans CRT 19" (pas en dessous merci) ou + sur Rennes ou ST Brieuc
- 1 CG ATI 1900XTX Sapphire CF edition pci-e avec son câble double 50 max fdpi
- 2 PIII 1.4 Ghz
- 8 x 1024 Mo DDR PC 3200
- 3 x 1024 Mo DDR2 667 Mhz
- 2 x 512 Mo DDR2 667 Mhz
- 1 Cg ATI 3xxx 4xxx ou Nvidia 9xxx ou GT2xx AGP Low Profile uniquement
Edité le 19/10/2009 à 18:54
